Our Top Picks Guides Categories Gear & Peripherals Laptops PC Components Company How We Review About Us Contact
Our recommendations are made independently. As an Amazon Associate we earn from qualifying purchases. Learn more ›
Gaming PCs and Builds

How to Check PC Specs on Windows and macOS

You do not need extra software to see what is inside your computer. This guide walks you through the built-in tools on Windows and macOS that show your CPU, memory, graphics card, storage, and more.

Published Nov 21, 2026 Updated Nov 19, 2026 7 min read

You can check your PC specs without installing anything: Windows and macOS both include system tools that list your processor, memory, graphics card, storage, and motherboard. The exact steps differ by operating system, so start with the section that matches your machine.

Knowing your specs matters when you plan an upgrade, compare a game's requirements, sell a computer, or ask for technical support. The information is the same everywhere, but some tools show more detail than others. I based this guide on manufacturer manuals and spec sheets, published standards such as PCIe, USB, and ATX, and widely documented PC building practice.

When You Need to Check Your PC Specs

You will reach for your specs at a few predictable moments. Maybe a game lists minimum requirements and you are not sure whether your graphics card clears the bar. Maybe you want to add RAM but need to know the type and how many slots are free. Or you are selling the machine and want an accurate listing.

Specs also settle arguments with support agents. When you contact a manufacturer about a failing component, the first questions are usually about your model, operating system version, and hardware. Having that information ready saves a round of emails.

One caution before you start: the tools below report what the system detects, not necessarily what the hardware can do. A motherboard may support faster memory than the installed sticks, and a power supply's capacity is rarely visible in software at all. For exact limits, check the manufacturer manual or spec sheet for your model.

Sleek home office setup with large monitor keyboard plants and headphones on desk

What You Need Before You Start

The list is short. You need the computer itself, a few minutes, and a way to note the results. No downloads are required for the basic checks, though optional utilities can add detail.

  • Your computer, powered on and logged in
  • A notes app, a text file, or a piece of paper to record the results
  • The manufacturer manual or support page for your model, for limits that software cannot show
  • Optional: a free system information utility if you want a single exportable report

If you are checking a desktop you plan to upgrade, keep the case accessible. Some details, like the number of free memory slots or the power supply label, require looking inside. Turn the computer off and unplug it before you open the case, and follow the manual's safety instructions.

How to Check PC Specs Step by Step

Work through these steps in order. Each one gives you a different piece of the picture, and together they cover everything most people need.

  1. Open the system information tool. On Windows, press the Windows key, type System Information, and open the result. On macOS, open System Information from the Utilities folder or hold Option and click the Apple menu. This screen gives you the operating system version, processor model, and installed memory at a glance.
  2. Check the processor and memory. In Windows Settings, go to System and then About. You will see the processor name, installed RAM, and system type (32-bit or 64-bit). On macOS, the Overview tab in System Information shows the chip or processor and total memory. Write these down exactly as shown.
  3. Identify the graphics card. On Windows, open Task Manager, go to the Performance tab, and select GPU. If your machine has integrated and discrete graphics, both appear. On macOS, the Graphics or Displays section of System Information lists the GPU and its memory. This matters most for gaming and video work.
  4. List your storage drives. On Windows, open File Explorer, right-click This PC, and choose Properties, or use Disk Management for a fuller view. On macOS, open Disk Utility or check the Storage tab in System Information. Note the capacity and type (solid state or hard drive) of each drive.
  5. Find the motherboard and BIOS details. On Windows, the System Information tool lists the baseboard manufacturer and model, plus the BIOS version and date. On macOS, the Hardware section shows the model identifier and boot firmware version. These details are what support agents ask for first.
  6. Check display and port capabilities. In Windows, go to Settings, System, and Display, then Advanced display settings to see resolution and refresh rate. On macOS, open Displays in System Settings. For ports, check the manufacturer spec sheet rather than guessing from the shape of the connector, since USB-C and HDMI ports can support different standards.
  7. Record everything in one place. Save your notes with the date. Specs do not change unless you change them, so a single record covers most future needs. Update it after any upgrade.

If you prefer one screen with everything at once, a free utility can export a report. That is optional, and the built-in tools already cover the essentials.

Close-up of hands fixing a computer with guidance from a mobile device

Common Mistakes to Avoid

  • Trusting the label on the box instead of the system. Retail packaging often describes the model family, not your exact configuration. Always confirm with the built-in tools.
  • Assuming memory speed from the installed sticks. The speed the system reports may be lower than the memory's rated speed because of motherboard or processor limits. Check the manual for supported speeds.
  • Confusing storage capacity with free space. A drive listed as 1 TB does not mean 1 TB is available. Operating systems and preinstalled software take up space, and the reported capacity differs from the marketing number.
  • Skipping the power supply on a desktop. Software rarely reports the power supply model or wattage. If you plan a graphics card upgrade, read the label inside the case and check the manufacturer's requirement.
  • Forgetting the operating system version. Some tools and games require a specific Windows or macOS version. Note it alongside your hardware so you do not chase the wrong problem.

When to Get Help or Check the Manual

Most spec checks are safe and simple. Stop and consult the manufacturer if you are unsure about opening a laptop, since many models have no user-serviceable parts inside. For desktops, unplug the power cord before removing a side panel, and avoid touching components unless you have discharged static electricity.

If a tool reports a component that does not match what you bought, or if the machine will not boot after an upgrade, contact the manufacturer's support page with your model and serial number. For warranty, software licensing, and data privacy questions, refer to the manufacturer or software publisher terms. If you are comparing replacement desktops for a home office, my roundup of desktop computers for home office can help you weigh the trade-offs.

Frequently Asked Questions

Can I check my PC specs without downloading software?

Built-in tools on Windows and macOS show your processor, memory, graphics, and storage with no downloads. System Information, Settings, and Task Manager cover the essentials, and manufacturer manuals fill in limits that software cannot report.

How do I find out what graphics card I have?

Open Task Manager on Windows and select the Performance tab, then GPU. On macOS, check the Graphics or Displays section of System Information. If both integrated and discrete graphics are present, both will be listed.

Where can I see my RAM speed and slot count?

Windows Task Manager shows installed memory speed on the Performance tab, but slot count and maximum supported speed come from the motherboard manual. Check the manufacturer spec sheet for your exact model before buying an upgrade.

Does checking specs void my warranty?

Using built-in system tools does not affect your warranty. Opening the case or replacing parts may, depending on the manufacturer. Review the warranty terms for your model before you make hardware changes.

Final Thoughts

The most important takeaway is to record your specs once and keep that note updated after any upgrade. Built-in tools give you the core details in minutes, and the manufacturer manual fills in the limits that software cannot see.

A few minutes of checking now saves confusion later, whether you are upgrading memory, comparing game requirements, or asking for support.

Contents
  1. When You Need to Check Your PC Specs
  2. What You Need Before You Start
  3. How to Check PC Specs Step by Step
  4. Common Mistakes to Avoid
  5. When to Get Help or Check the Manual
  6. Frequently Asked Questions
  7. Final Thoughts